Technical data

Dimensions

dimension hs 50

	Smart Watch HS 50	TRIGGER PAD
Length x width x height	44,0 x 55,7 x 16,9 mm	93,5 x 78,5 x 4,0 mm


Weight Smart Watch HS 50	45 g
Weight Smart Watch HS 50 & TRIGGER PAD	52 g


Operating temperature	0°C to +50°C
Operating temperature during charging	0°C to +40°C
Humidity	5 % - 95 %, non condensing
Fall resistance	1000 drops from 100 cm onto steel + 50 drops from 180 cm onto concrete
Protection class	IP 65
Speaker volume	85 dB(A) at a distance of 10 cm


Display	Active matrix electrophoretic display
Screen diagonal	1,54‘‘
Resolution	200 × 200 Pixel
Active area	27,0 x 27,0 mm
Operating principle	Capacitive touch


Supported Bluetooth Low Energy versions	4.2, 5.0, 5.1
Range	100 m free field
Range at Bluetooth 5 long range (coded PHY)	325 m open field
Android and Windows	Internal BT solution is supported


Typical capacity	675 mAh, Lithium polymer
Fast charging (10 - 80 %)*	58 Min.
Operating time	24 h or up to 8000 scan cycles
Battery lifetime	At least 80% of capacity after 500 charging cycles

* The charging performance depends on the state of charge, ambient temperature and ageing of the battery


	If the size of the code is given in "mil", it is "milli-inch", i.e. 0.0254 mm. The specification always refers to the smallest element of the code. Example 100 mil code 39: The smallest element in the barcode (black bar or white area) is 100 x 0.0254 mm = 2.54 mm wide. A barcode of this size can be read at a maximum distance of 436.9 cm according to the table below.